Creating a Master File
Okay enough procrastination on my part...
This is more along the lines of a how-to manual instead of my regular drivel. So I guess this should be filed under “How-to Drivel” or something equally impressive.
If someone happens to have a suggestion/short-cut/alternate route/or much needed improvement please don’t hesitate to post it here. The Knights are about feed-back and shared ideas. I promise I won’t take it personally.
Creating an opening book is really easy if you know what kind of positions you like to play. The hard part is doing enough research to have an understanding about which openings lead to said positions. But then again the best way to find out what you like is to play through the openings. You also have to decide whether or not you plan on playing the mainlines or do you plan to play systems in an attempt to reduce study time. There are pros and cons to both methods and I’m not even going to set foot in that territory.
Ok, with any cook book you need a list of ingredients:
(I’m using the following, but there are a variety of programs that could be substituted to achieve roughly the same results.)
Programs
Chessbase 9 (CB9)
Bookup 2000 Pro [Build 25] (BU)
Fritz 8 (F8)
Reference Material
Encyclopedia of Chess Openings A-E (ECO)
Reconnaissance and “Rough Draft”
As White I play 1. e4, of course after pushing my King’s pawn two squares forward
my opponent gets his/her say in the matter so I want to try and be prepared as much as I can.
Since I don’t know who my opponent is and what they might play I now start with the first of a seemingly long list of possibilities.
For this example I’m only worried about 1...e5
I meet 1...e5 with 2. Nf3. Using the ECO index I know that 1.e4,e5 falls under the C grouping. I’m not worried about possible transpositions at this point, I’m after information. So I fire up CB9, open a new board, and enter the previous moves then I hit the reference tab. This is when the fun begins, CB9 proceeds to scan the database that I have chosen to be used as my main source of information. (I’m using Megabase 2005, since it contains the most games and strongest players.) After a brief moment or two (depending on your computer speed) CB9 starts giving me a report of what I can expect to see as Black’s second move in order of frequency played.
The reason I use the “reference tab” as opposed to an “opening report” is because the “reference tab” will find transpositions and is faster for the needs of my rough draft.
If I want more detail I can do an “opening report”.
My database reports 286,513 games are found with this position. Notice I didn’t say move order because the position could in theory be reached by several move orders.
(1.Nf3, e5 2. e4), (1.Nf3,e6 2.e3,e5 3.e4), etc. [I just threw this tidbit in now because it is easier to explain transpositions with a simple example than trying to show something 6 moves deep. Now forget that I mentioned transpositions, and that we are looking for a list of Black’s second possibilities. :)]
The report tells me that Black has played the following:
2...Nc6 (237,048) 83%*
2...Nf6 (31,153) 11%
2...d6 (14,147) 5%
2...f5 (1,904) .006%
2...d5 (938) .003%
2...Qe7 (533) .001
2...Bc5 (318) .001
{* These are percentages that I have added to help throw some perspective on what to expect at this point.}
And even more moves than I have shown, but the number of times those moves have been seen in tournament play lessens significantly the farther we get from the top of the list. Does 2...Qg5?? Really need to be prepped?
Since I want to get through with this sometime before the turn of the next century
I need to establish some guidelines on as to how far I’m willing to prepare.
Where do I draw the line? That’s a tough one to answer, because the variations will continue to fluctuate along with the frequency. So it is at this point that I reach for my ECO for a little additional guidance. (I would probably skip the first step and just head straight to the ECO if it weren’t for the fact that some of the data in the ECO assumes you have the previous editions.)
Since the first five have the highest occurrence percentages I will start with them.
1.e4, e5 2.Nf3, Nc6 is shown as group C4. Turning to the C4 chapter gives
me a list of 10 diagrams that are numbered in succession C40-C49.
Here is where knowing what openings you want to play helps, and if you don’t know
this is a great place to gain some exposure.
C40 1.e4 e5 2.Nf3
C41 1.e4 e5 2.Nf3 d6
C42 1.e4 e5 2.Nf3 Nf6
C43 1.e4 e5 2.Nf3 Nf6 3.d4
C44 1.e4 e5 2.Nf3 Nc6
C45 1.e4 e5 2.Nf3 Nc6 3.d4 ed4 4.Nd4
C46 1.e4 e5 2.Nf3 Nc6 3.Nc3
C47 1.e4 e5 2.Nf3 Nc6 3.Nc3 Nf6
C48 1.e4 e5 2.Nf3 Nc6 3.Nc3 Nf6 4.Bb5
C49 1.e4 e5 2.Nf3 Nc6 3.Nc3 Nf6 4.Bb5 Bb4
The only codes that apply to me at the moment are C40, C41, C42
C40 covers all of the offbeat responses such as the Latvian, and Elephant Gambits.
C41 covers the Philidor lines.
C42 covers the Russian/Petroff Classical lines
The rest head into lines that I don’t happen to play at this moment, such as the Two Knights defense, and the Scotch.
All five of Black responses have been addressed except that I don’t see my response to 2...Nc6 in this group.
I meet 2...Nc6 with 3.Bc4. It must be in another set of ECO codes (C5 Group), so back to the book repeating the above process. Fortunately since I am trying to head into Guioco Piano
waters I get to eliminate ten tons of theory by avoiding the vast expanse known as the land of the Ruy Lopez. [Thank You Predrag! :)]
(I could also find each of the ECO codes using CB9 by selecting Tools/Opening Classification. I would have to scroll through each of the move orders, which would take some additional time. The advantage would be that is gives me the name of the general defense. There are plenty of on-line resources that list the moves with the related names
in great detail just do a search on “Openings classified by ECO code”. I usually just grab the code first and eventually the name.)
Now I know what ECO codes I can use to find or filter games.
Whether I create the files myself with CB9 or just download the games it really doesn’t matter. The main thing is that I want them in .pgn format because they are ultimately headed into a soon to be created Bookup file/book.
So now I gather all of the .pgn games I can find for each of the necessary ECO codes.
It’s not really important to have the most recent games or the strongest players for this part of the book building. All I’m really after is a lot of variations to create a master file for 1.e4 e5 2.Nf3 ... It is faster to prune lines out of an opening book than it is to add them. I learned this the hard way.
Select PGN/Import Games/ ->select the .pgn file. ->Reduce the number of plies to import
Down to 24 (12 moves deep, is plenty for my level of play.) De-select Highlight novelties->Click Ok and repeat the process for each of the needed .pgn files.
Now back to Commands/Select “Clear Rate Symbols”->Ok. This is necessary to clear the stray evaluations, and give you a clean slate. While doing the previous two steps you will have plenty of time to grab a beverage or a snack between commands.
After making a back-up Book of the “E4-E5 Master” as a safety check I would close out of all of the new “Books” and then reopen them one at a time to make sure they function properly. After they check out close the “Back-Up Master” and now rename the Book something like “E4-E5 Work”.
Finally... if you have managed to make it this far give yourself a pat on the back because that was a lot of work, and we have only reached the foot of the mountain.
